Publications

Dr Ramesh Raghavendra

Patents

  1. Integrated Passive Device and method for producing such a device  -  Ramesh Raghavendra,  Clive Randall, Amanda Baker & Neil Mcloughlin, U.S. Patent No. 6700772.
  2. Production of Passive Devices  (Microwave sintering) – Dinesh Agarwal,  Ramesh Raghavendra  & B. Vaidyanathan, U.S. Patent No. 6399012.  

Publications

  1. B. Vaidhyanathan, K. Annapoorani, J. Binner and  R. Raghavendra  (2010)  Microwave sintering of Mulitlayer Integrated Passive Devices,  J. Am. Ceram. Soc., 93(8), pp.2274-2280.
  2. Pillai,S.C.,   Kelly, J.M.,   McCormack, D.E. &  Ramesh, R. (2008)  High performance ZnO varistors prepared from nanocrystalline precursors for miniaturised electronic devices  - Journal of Mater. Chemistry,18, pp. 3926-3932.
  3. Pillai,S.C.,   Kelly, J.M.,   McCormack, D.E. &  Ramesh, R. (2006)  Effect of step sintering on breakdown voltage of varistors prepared from nano-materials by sol gel route, Advances in Applied Ceramics, 105 (3) pp.158-160 .
  4. Stojanovic,G., Damnjanovic,M., Desnica,V., Zivanov,L.,  Ramesh R.,  Bellew, P. &   Mcloughlin, N. (2006)   High performance zig-zag and meander inductors embedded in ferrite material,  Journal of Magnetism and Magnetic Materials, 297(2) pp. 76-83.
  5. Damnjanovic,M., Stojanovic,G., Desnica,V., Zivanov,L.,  Ramesh R.,  Bellew, P. &   Mcloughlin, N. (2006)   Analysis, design and characterisation of ferrite EMI suppressors, IEEE transactions on Magnetics, 42(2) pp. 270-277.  
  6. Pomeroy, M.J., Nestor, E.,  Ramesh R.  &  Hampshire, S. (2005)  Properties and crystallisation of Rare-earth Si-Al-O-N glasses containing mixed Trivalent modifiers, Journal of American. Ceramic Society, 88 (4), pp. 875-881.  
  7. Ramesh R.,   Bellew, P.,   Mcloughlin, N., Stojaonvoic,G., Damnjanvoic, M.,   Desnica,V. & Zivanov,L. (2004)Characterisation of novel varistor+inductor integrated passive devices  IEEE Electronic Devices Letters 25(12), pp. 778-780.  
  8. Rafferty, A., Gunko, Y. &    Ramesh R.  (2004)  An investigation of co-fired varistor-ferrite materials,   Journal of European Ceramic Society, 24, pp. 2005-2013.
  9. Pillai,S.C.,   Kelly, J.M.,   McCormack, D.E. &    Ramesh,  R. (2004)  Self assembled arrays of ZnO nanoparticles and their application as varistor materials,   Journal of   Materials Chemistry 14, pp.1572-1578.
  10. Pillai,S.C.,   Kelly, J.M.,   McCormack, D.E. &    Ramesh,  R. (2004)  Microstructural analysis of varistors prepared from nano-size ZnO,   Journal of Material Science & Technology, 20, pp.964-968.
  11. Pillai,S.C.,   Kelly, J.M.,   McCormack, D.E. &    Ramesh,  R.  (2003)  The effect of processing condition on varistors prepared from nanocrystalline ZnO, Journal of   Materials Chemistry, 13, pp. 2586-2590.
  12. Vaidhyanathan,B., Annapoorani, K., Binner, J.G.P. &  Raghavendra,  R. (2003)  Microwave Sintering of Integrated Passive Devices, in D. C. Folz, J.H. Booske, D.E. Clark, and J.F. Gerling (Eds.),  Microwave and Radio Frequency Applications,    pp.423-428
  13. Pomeroy, M.J., Nestor, E.,  Ramesh, R.     & Hampshire, S. (2001)  Properties of M1-M2-Si-Al-O-N glasses (M1 = La or Nd, M2 = Y or Er), Key Engineering Materials, 206-213,   pp.2057 – 2060.
  14. Ramesh,  R., Nestor, E., Pomeroy, M.J. & Hampshire, S. (1997)  Formation of Ln-Si- Al-O-N glasses and their properties, Journal of European Ceramic Society, 17, pp.1929-1939.
  15. Ramesh,R., Byrne, P., Hampshire, S. & Pomeroy, M.J. (1997)  Kinetics of weight changes and morphological developments during oxidation of pressureless sintered -sialons, Journal of European Ceramic Society 17, pp.1901-1909.
  16. Ramesh,R., Nestor, E., Pomeroy, M.J. & Hampshire, S. (1996) Potential of NdSiAlON Glasses for Crystallisation to Glass-Ceramics, Journal of . Non-Crystalline Solids 196(1-3), pp.320-325.
  17. Gopal S and Ramesh R et al., entitled “Nanomedicine of anastrozole for breast cancer: Physicochemical evaluation, in vitro cytotoxicity on BT-549 and MCF-7 cell lines and preclinical study on rat model”. Life Sciences 141 (2015) 143–155.
  18. Gopal Venkatesh Shavi, Usha Yogendra Nayak, Ramesh Raghavendra, Shrawan B and Meka Sreenivasa Reddy.Enhanced Dissolution and Bioavailability of Etoricoxib in Solid Dispersion Systems: An Investigation into the Role of Carrier Matrix on Stability, In vitro and In vivo Performance.RRJPPS | Volume 5 | Issue 1 | January-March, 2016, 55-63.
  19. Jonathan Downey, Paul O’Leary and Ramesh Raghavendra. Comparison and analysis of audible sound energy emissions during single point machining of HSTS with PVD TiCN cutter insert across full tool life. Wear, Volume 313, Issues 1–2, 15 May 2014, Pages 53–62.
  20. E. Chadwick, O.M Clakin, R. Raghavendra and D.A Tanner. A bioactive metallurgical grade porous silicon-polytetrafluoroethylene sheet for guided bone regeneration applications. Bio-Medical Materials and Engineering, vol. 24, no. 3, pp. 1563-1574, 2014
  21. Suresh C. Pillai, John M. Kelly, R. Raghavendra and Declan E. McCormack. Advances in the Synthesis of ZnO nano materials for varistor devices. J. Mater. Chemistry. 1 (2013) 3268-3281.

Dr Colin Reidy

Publications

  1. C. Reidy,  S. Hampshire, TJ. Fleming MR. Towler.  Comparison of Microwave and Conventionally Sintered Yttria Doped  Zirconia Ceramics.  International Journal of Applied Ceramic Technology, (2011).
  2. IM. Brook, CO. Freeman, S. Grubb, DJ. Curran,  C. Reidy, NM. Cummins, S. Hampshire, MR. Towler.  Biological evaluation of nano hydroxyapatite-zirconia (HA/ZrO2) composites and strontium-hydroxyapatite (Sr-HA) for load bearing applications  –  Journal of Biomaterials Applications  – (2011).
  3. MR. Towler, S. Hampshire,  C. Reidy, DJ. Curran, TJ. Fleming.  Comparison of microwave and conventionally sintered yttria doped zirconia ceramics and hydroxyapatite-zirconia nanocomposites.  Publication of the 35th International Conference on Advanced Ceramics & Composites (ICACC):  The American Ceramic Society (2011).

Conference Proceedings

  1. MR. Towler*, S. Hampshire,  C. Reidy, DJ. Curran, TJ. Fleming.  Comparison of microwave and conventionally sintered yttria doped zirconia ceramics and hydroxyapatite-zirconia nanocomposites  –  Invited lecture* at the 35th International Conference & Exposition on Advanced Ceramics & Composites ((ICACC2011), 5th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (in honour of Professor Katsutoshi Komeya, Yokohama National University, Japan), Daytona Beach, Florida, 23-28 January 2011., Florida, U.S.A. (2011).
  2. IM. Brook, CO. Freeman, S. Grubb, DJ. Curran,  C. Reidy, NM. Cummins, S. Hampshire, MR. Towler.  Nano-composites for load-bearing applications  –  International Association for Dental Research, Barcelona, Spain. (2010).
  3. C. Reidy, S. Hampshire, TJ. Fleming, MR. Towler.  Mechanical Properties of Microwave Sintered Zirconia. 3rd international conference on Mechanics of Biomaterials and Tissues, Clearwater, USA. (2009)
  4. C. Reidy, S. Hampshire, TJ. Fleming, M. Towler.  Microwave Sintering of Yttria Doped Zirconia Bioceramics  –  United Kingdom Society for Biomaterials (UKSB), Belfast, UK. 2009. 

Brendan Phelan

  1. Phelan, Brendan  (2010)  Upgrading of an automated micron level measurement system for submicron measurement Masters thesis, Waterford Institute of Technology. http://repository.wit.ie/1612/

Dr Sara Karam

Publications

  1. S. Karam, R. Teti, Wavelet Transform Feature Extraction for Chip form Recognition during Carbon Steel Turning, Procedia CIRP, Volume 12, 2013, Pages 97-102, ISSN 2212-8271.
  2. T. Segreto, S. Karam, A. Simeone, R. Teti, Residual Stress Assessment in Inconel 718 Machining Through Wavelet Sensor Signal Analysis and Sensor Fusion Pattern Recognition, Procedia CIRP, Volume 9, 2013, Pages 103-108, ISSN 2212-8271.
  3. T. Segreto, S. Karam, R. Teti, J. Ramsing, Feature Extraction and Pattern Recognition in Acoustic Emission Monitoring of Robot Assisted Polishing, Procedia CIRP, Volume 28, 2015, Pages 22-27, ISSN 2212-8271.
  4. S. Karam, P. Centobelli, D. M. D’Addona, R.Teti, Online Prediction of Cutting Tool Life in Turning via Cognitive Decision Making, Procedia CIRP, Volume 41, 2016, Pages 927-932, ISSN 2212-8271.
  5. T. Segreto, S. Karam, R. Teti, J. Ramsing, Cognitive Decision Making in Multiple Sensor Monitoring of Robot Assisted Polishing, Procedia CIRP, Volume 33, 2015, Pages 333-338, ISSN 2212-8271.
  6. T. Segreto, S. Karam, R. Teti. Signal processing and pattern recognition for surface roughness assessment in multiple sensor monitoring of robot-assisted polishing, International Journal of Advanced Manufacturing Technology, Volume 99 (1), 2017, Pages 1023-1033,  ISSN 1433-3015.

Mr Deepak Shamvedi

Conference Proceedings

  1. D. Shamvedi, O. McCarthy, E. O'Donoghue, P. O’ Leary, R. Raghavendra. Surface treatment of 3D metal printed microwave components – 18th Research Colloquium on Radio Science and Communications for a Smarter World, Dublin, Ireland; March 2017.